Varian

SMS Settings

Bydonfrank July 2, 2021July 2, 2021

SMS Settings

TRAY.SIZE=50
TRAY.NUMBER=2100 (for 50 samples)
TRAY.NUMBER=2050 (for 100 samples)

CP31:RACK => 1-50
CP32:RACK => 51-100

Typical vertical is 19.2 above rack while training.

To format a 720KB floppy +> format a: /T:80 /N:9

Varian

vxWorks PPC
Bydonfrank July 2, 2021July 2, 2021

Consoles with a PPC may not boot up because the bootfile in /etc/bootptab is VxWorks, and not vxWorksPPC. Change this. Also, change the bootfile in /vnmr/acq/bootptab to vxWorksPPC or a subsequent setacq will overwrite the bootfile name. The PPC should have the bootfile (vxWorksPPC) in nvram, and on boot, the console requests the bootfile. The…

Read More vxWorks PPC
Varian

Settings for dof during pwxcal
Bydonfrank July 2, 2021July 2, 2021

Settings for dof during pwxcal

Read More Settings for dof during pwxcal
Varian

acq Debug
Bydonfrank July 1, 2021July 1, 2021

The closest thing there is is the np checklist. The one other thing that may give you a clue as to the culprit if the problem is reproducible, is to run debug. You will need to set up mini com. In a terminal window, cd script filename start minicom In the VnmrJ command line, type…

Read More acq Debug
Varian

ProTune Display
Bydonfrank July 2, 2021July 2, 2021

To add the display of Protune during tuning type the following. create(‘showprotunegui’,’string’,’global’) showprotunegui=’y’

Read More ProTune Display
Varian

SMS – Reverse Trays
Bydonfrank October 5, 2023October 5, 2023

If you need to reverse the trays, CP31 for CP32, you must also train the rack position CP31:CLEAR. (9) Define Rack CP31:CLEAR (M)ove

Read More SMS – Reverse Trays
Varian

Mass Flow Setting
Bydonfrank July 2, 2021July 2, 2021

Calibrate the Mass Flow Meter and Pressure Transducers. 1. Follow the procedures in “Calibration of Mass Flow Meter and Pressure Transducers” 2. Continue with “Adjust the Mass Flow and Ballast Tank Valves,” Adjust the Mass Flow and Ballast Tank Valves Procedure for reduction of vibrations associated with the compressed gas. 1. Remove the housing surrounding the CCC….

Read More Mass Flow Setting

Similar Posts